SIP Gateway & ATA

Sipdex T1/E1 Gateway – GWT1 (IDAP/PRI23/E1)

Sipdex T1/E1 Gateway – GWT1 (IDAP/PRI23/E1)


•Cost-effective VoIP trunk gateway
•Support echo cancellation, DJB, VNG, VAD and Qos
•Voice codec option: G.711A/U,G.723.1 (option), G.729A/B(option), iLBC(option)
•Simple Configuration, friendly GUI, strong handling capacity,stability system
•Good compatibility, support Asterisk, Elastix, Freeswitch and Small and medium IPPBX platform
Sipdex 4-8 Port FXO / FXS SIP Gateway

Sipdex 4-8 Port FXO / FXS SIP Gateway


Supports SIP/MGCP protocols
Flexible configurations of FXS/FXO ports
Outstanding security: Configurable SIP ports and IP address whitelist
Supports IP/PSTN LCR selection
Supports fax over IP using T.38
Supports polarity-reversal/busy-tone detection
Supports Auto Provisioning and TR069/SNMP
Supports HA and PSTN failover
Supports Class I lightning protection
Compatible with standard SIP platforms, For eg: 3CX, Asterisk, Elastix
Sipdex 16-24 Port FXO/FXS Gateway

Sipdex 16-24 Port FXO/FXS Gateway


Support 3GPP IMS
Support TR069/TR104/TR106 for remote management
Flexible configuration of FXS/FXO ports
PSTN failover on power failure or network interruption
500 routing rule capacity
IP filter, encryption for security
Support Fax (T.30/T.38), POS machine and modem
Busy tone detection and polarity reversal of FXO ports
Fanvil G100S ATA Gateway (1 x FXS)

Fanvil G100S ATA Gateway (1 x FXS)


One RJ-11 FXS port to connect an analog phone or fax machine
Supports SIP 2.0 (RFC3261) and correlative RFCs
SIP supports 2 SIP servers, and Group servers
Supports SIP UDP/TCP
Fanvil G200S ATA Gateway (2 x FXS)

Fanvil G200S ATA Gateway (2 x FXS)


Two RJ-11 FXS port to connect an analog phone or fax machine
Supports SIP 2.0 (RFC3261) and correlative RFCs
SIP supports 2 SIP servers, and Group servers
Supports SIP UDP/TCP
Share on FacebookTweet about this on TwitterShare on Google+Pin on PinterestShare on StumbleUponShare on LinkedIn