Create SIP Trunk to tie SIPDEX M-200 and Elastix

假設持有的電話號碼是 34005600 – 345005699，當中以345005699做 SIPDEX M-200與 Elastix之間的Trunk 登記號碼

1) Login Elastix

2) Click PBX

3) Click Extensions

4) In Device , Choose Generic SIP Device and then click Submit.

5) User Extension, Display Name, Outbound CID, DID Description and Add Inbound DID input extension number, in this example we will use 345005699. Call waiting choose Disable. Secret input this SIP account’s password. And then click Submit at bottom and click Apply Configuration Changes Here at the top.

6) Login SIPDEX M-200. Go to Basic > Trunks. And then click New VoIP Trunk.

7) Description input this trunk’s name. Host input Elastix’s IP. Depend on Elastix setting, if necessary, change SIP port 5060. Unchecked Without Authentication. Input username as 345005699 and input password, these value we set at Step 5. And then click Save.

8) Go to Report > Register Status can be found a line “trunk-sip ….”. If the Status value is “OK” that mean SIP Trunk can be used.

9) Go to Basic > Outbound Routes > DialRules and click New DialRules.

10) Rule Name input the DialRule’s name. In available Trunks select SIP trunk we created in Step 7. Custom Pattern input “9xxx.” and Delete input 1. When we dial prefix number 9 and phone number is more than 3 such as 12345678, SIPDEX M-200 will thought SIP Trunk “m200toElastix” to Elastix dial to outside.

11) Click Basic > Outbound Routes > DialPlans and click Edit.

12) Checked M200toElastix and checked all Rules in Include Internal Calling and then click Save.